Skip to Main Content

Laurel Metal 399-120 CryptoPay Swiper and Dixmor LED7 Timer Side Mount Box for Vac and Bay Meter Boxes

Mfr. Model #:
KR Part #:
4.40 lbs
In Stock
Now Only!
Easily mount a CryptoPay Swiper and a Dixmor LED7 Timer to the side of a coin box or flat surface near your equipment. Bidirectional mounting ability means the box can be mounted on either side. Includes: side mount box, 2 tube locks (with keys), and flush mount screws.

NOTE: Image shows CryptoPay and Dixmor timer installed. Please note those two items are sold separately.

Product Description

Side Mounted Box for CryptoPay & Timer

The Laurel Metal 399-120 Side Mount Box is used to mount a swiper and timer when you don't have enough room on your meter box faceplate. Bidirectional design enables mounting on either the left or right side of the coin box or any surface near your equipment. This tough 16-gauge stainless steel box is prepared to mount CryptoPay and a Dixmor LED7 Timer.


  • 16-guage stainless steel construction
  • Left or right bidirectional mounting ability
  • Dimensions: 11 1/4" H  x  5 1/4" W  x  3 1/2" D  (outside)
  • Side panel cover available to cover holes when mounted on wall (KR part #LP399127)


  • Side mount box – made up of a base and a cover
  • 2 tubular locks with 2 keys – keyed alike
  • Front Door Panel has holes and flush-mount panel screws (with 6-32 nuts) ready to mount LED7 and CryptoPay


  • Locate Side Mount Box and mark the side of your surface for box mounting.
  • Drill your choice of holes in mounting surface (box has 1/4" diameter holes).
  • Drill or knock out a wire clearance hole in the mounting surface to allow component wires into your meter box.
  • Complete wire connections per your equipment, Dixmor, and CryptoPay instructions.
  • We suggest a small bead of silicone caulk at the top surface corners to stop water intrusion.
  • The box is not designed to be waterproof, aim to protect wire connections.
  • Look under "Manuals" for further instructions.

Items Not Included (Purchase Separately)

  • CryptoPay Swiper (KR part #CPS3005) – vacuum or bay style with bare wires and button
  • Dixmor LED7 (KR part #CB0316) timer - optional purchase is the Dixmor lexan lens plate
  • Dixmor LED7 Wiring Harness (KR part #CB0321)
  • Mounting fasteners for the (up to 8) 1/4" diameter holes in box

Other Side Mount Box Options

  • 399-85 CryptoPay Swiper Side Mount Box (KR part #CPS3025)
  • 399-160 CryptoPay Swiper and CryptoTap Side Mount Box (KR part #CPS3026)
  • 399-150 CryptoPay, CryptoTap, Dixmor LED6/LED7 Side Mount Box (KR part #CPS3025-VT)
  • 399-130 CryptoTap Side Mount Box (KR part #CPS3025-T)
  • 399-85-TAP CryptoTap Plus Side Mount Box (KR part #CPS3025-TAP)
  • 399-131 CryptoTap Plus and LED7 Side Mount Box (KR part #CPS3025-TAP-T)
  • 399-140 NAYAX Medium Side Mount Box (KR part #LP399140)
  • 399-170 NAYAX Large Side Mount Box (KR part #LP399170)
  • 399-145 NAYAX and LED7 Side Mount Box (KR part #LP399145)
  • 399-175 NAYAX and Dixmor LED6/LED7 Large Side Mount Box (KR part #LP399175)

Product Reviews

Frequently Asked Questions

Question:Will a LED6 mount OK? - Mark (12/20/2020)
Response:No, only an LED7 will mount in this box.