Skip to Main Content

Dema 401P.0 Brass Direct Acting Normally Closed Solenoid - 1/4, Buna, No Coil

Mfr. Model #:
KR Part #:
0.43 lbs
In Stock
Now Only!
Brass no coil solenoid valve with 1/4" ports. 120 volt AC, 150 PSI maximum pressure. NOTE: This product is only the solenoid. You will need to install a coil on this valve.
Prep 65

Prop 65


Technical Specifications

Max PSI: 150
Max Temperature: 120 degrees F
Liquid Temperature: 200 degrees F
Inlet Port: 1/4 inch
Outlet Port: 1/4 inch

Product Description

Less the Coil Brass Solenoid - 1/4" NPT

The Dema 401P.0 solenoid valve is a direct-acting, normally closed valve designed for low pressure commercial applications. This brass body solenoid has 1/4" NPT pipe threads, a maximum pressure rating of 150 PSI, and a 7/64" orifice. This valve does NOT come with a coil junction box.

With direct-acting valves, the stem and plunger assembly opens the port of the valve directly and requires no minimum pressure to operate.

  • No coil
  • Direct-acting
  • Normally closed
  • Brass body material
  • Buna-N seal
  • 1/4" NPT pipe
  • 2.09 GPM at 60 PSI
  • 7/64" (.109") orifice
  • .27 CV flow factor
  • Maximum 150 PSI
  • Minimum 0 PSI
  • Rated for 200 Fahrenheit fluid and 120 Fahrenheit ambient.

Recommended Applications:

  • Water
  • Air
  • Light Oil
  • Non-Corrosive
  • Non-Explosive Liquids

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to

Product Reviews

Frequently Asked Questions