Premiere Tankless Water Heater

The ENERGY STAR¨ qualified Bradford White Infiniti® K Series Tankless Water Heater uses STEADISET® Technology to keep water temperature consistent, virtually eliminating the "cold water sandwich" without the need for an internal buffer tank and recirculation pump. The Infiniti® K Series features a simple combustion management system uses self-calibrating sensors to automatically configure air fuel ratio for flue length, gas type, and altitude - without a combustion analyzer. Scale Reduction Technology significantly reduces the incidence of scale build-up known to result in poor performance, additional maintenance, and premature component or product failure. Works efficiently even at low flow rates and activates at just 0.45gpm. It is easy to install and includes convenient top connections for easy retrofit, as well as built-in flush ports.

Features and Benefits:

• Built-In Digital Control - Temperature can be adjusted on the front control panel (100-140°F/38°C-60°C).
• Active Bypass - Achieves superior temperature stability (±2°F / ±1°C).
• External Recirculation Pump Wiring - Installed. Built-in controls provides precise operation of external recirculation pump with, or with out, additional external temperature sensor (Recirculation pump sold separately).
• Venting Length Up To 280 ft. - Direct vent, power vent, and concentric venting terminations approved. PP, PVC, and CPVC approved venting material (refer to I&O manual for details). 2" (51mm) vent up to 60 ft. (18m) and 3" (76mm) vent up to 280 ft. (85m). 
• Gas Connection Flexibility - 1/2" (13mm), 3/4" (19mm), or 1" (25mm) connections permitted (refer to I&O manual for details).
• Inlet Water Filter - External access for easy maintenance.
• Space Saving Installation - Compact size for tight installations.
• Built In Freeze Protection - Protects unit from freezing. Activates automatically when the water heater is plugged in.
• Easy LP Gas Field Convertibility - Purchase of additional kit NOT required to convert from NG to LP.
• Heat Exchanger - Primary Copper with Secondary Stainless Steel (316L) heat exchanger helps maximize life and minimize scale build-up.
• Pressure Relief Valve - Included (Integral port).
• Built In Flush Valves - For servicing/de-scaling.
• Flushing condensate trap.
• Intelligent Cascading Kit (Optional) - Up to 24 units can be connected together with ease. 
• Complies with the latest Ultra-Low NOx requirement (14 ng/J NOx limit).