Skip to Main Content

Armor All Ultra Shine Headlight Restoration Wipes (6 count) - 6 Per Case

Brand:
Mfr. Model #:
18514
KR Part #:
AR18514
Weight:
2.00 lbs
GTIN:
10070612185140
Out of Stock - Pre-Order Now
MSRP
$71.99
Now Only!
$40.97

Easily wipe away oxidation from car headlights with these Armor All restoration wipes. These wipes provide UV protection. No tools or sandpaper required. 6 per case.

Note: Avoid contact with painted vehicle surfaces.

Not for export outside of U.S.

Not For Export

 
 

Product Description

Headlight Oxidation Remover - 6/Case

Have you noticed that your headlights don't seem as bright as they once were? Oxidation on the lenses could be to blame. But don't worry - these Armor All Ultra Shine wipes make restoring your headlights an easy task! There are no tools or sandpaper needed. Plus, these wipes offer lasting UV protection.

Features:

  • 6 packs per case
  • Easily wipe away oxidation to restore headlights like new
  • No tools or sandpaper needed
  • Pre-moistened wipes take the guess work out of how much to use
  • Step one cleans and wipes away haze and yellowing caused by oxidation
  • Step two wipes on UV Sealant Protection Coating for lasting UV protection

Each pack includes:

  • 4 oxidation removal wipes
  • 2 UV sealant wipes

Case includes 6 boxes that contain 6 wipes each

UPC:

  • GTIN: 10070612185140

Step 1 involves cleaning and wiping away oxidation.

Note: in both steps, it is important to avoid contact with painted vehicle surfaces. 

  • Ensure headlight is clean and dry.
  • Open one cleaning/oxidation removal pouch and remove wipe.
  • Scrub the headlight with firm, even pressure in a back and forth motion. You will be able to see oxidation residue being removed.
  • Turn wipe to a clean side.
  • Continue to wipe until no residue is visible on the wipe. Discard wipe.
  • Open a second cleaning/oxidation removal pouch and continue wiping back and forth with firm pressure for at least 2 minutes.
  • Repeat steps 1 through 6 on the other headlight.

Step 2 includes applying the UV sealant protection:

  • Ensure the surface is dry before applying sealant. You may need to wipe with a clean, lint-free towel.
  • Open the UV sealant protection pouch and pull out wipe.
  • Apply to the headlight surface by wiping in one direction. One wipe can coat two headlights, but you may use two.
  • Let the surface dry completely. The surface will be dry to the touch in about 3 hours. Do not touch the surface and avoid contact with water until dry. If spotting or streaking occurs from water contact before fully dry, repeat Step 1 and Step 2 with fresh wipes. Please note that drying may take longer in lower temperatures or higher humidity.

Product Reviews

Frequently Asked Questions

Updating...
Loading...