Your shopping cart is currently empty.
Sign in and join Kleen Rite rewards to earn points and redeem rewards
CAT 1CX050RA2P Direct Drive Plunger Pump with Pulse Hose - 1/2 HP, 0.5 GPM, 1000 PSI - Assembled
Brand:
Mfr. Model #:
1CX050RA2P
KR Part #:
PU1CX050RA2P
Weight:
28.00 lbs
Usually Ships in 2 Weeks
A pump with a pulse hose minimizes pulsation and lowers amp draw. This pump does NOT come with oil.
NOTE: This is a custom made pump and it is non-cancelable and non-returnable.
Technical Specifications
RPM: 1750
Voltage AC: 115/230
Phase: Single
Bore: 16 millimeter
Horsepower: 1/2
Crankcase Capacity: 2.03 ounce
Stroke: 6.3 millimeter
Shaft Diameter: 1/2 inch
Max Temperature: 104 degrees F
Max PSI: 1000
Inlet Port: 3/8 inch
Product Description
Direct Drive Plunger Pump with Pulse Hose
Having a flexible inlet of 1000PSI pressure, this CAT pump with a hose can remove standard water debris, no problem. Make sure to remember to service the regulator on the same schedule as the pump seals and valves. When locating the discharge port also remember that it is on the side of the regulator and can be installed with the cross fitting, and then mounted on top of the port and gauge in lower port.
Dimensions: 3.62" x 5.12" x 6.85"
- Reliable and efficient
- Designed for cold water or ambient temperature operation
- Oil bath lubrication assures optimum drive-end lubrication
- Regulator and pulse hose included
- Pump and motor assembled
- 12" leads
- Please note that this pump does NOT come with oil - find authentic CAT Pumps Oil here.
