Your shopping cart is currently empty.
Sign in and join Kleen Rite rewards to earn points and redeem rewards
General Pump TP2526J34UIL Plunger Pump with Gas Engine Flange, Unloader and Injector, 2.6 GPM, 2500 PSI, Left Shaft
Brand:
Mfr. Model #:
TP2526J34UIL
KR Part #:
GPTP2526J34UIL
Weight:
11.50 lbs
GTIN:
682491119388
Compact design plunger pump for high-pressure cleaning applications. Features SAE J609 flange for direct coupling to a gasoline engine. Includes a built-in unloader for pressure regulation. Note: picture shows right shaft, but this is a left hand pump.
Technical Specifications
Bore: 15 millimeter
Crankcase Capacity: 11 ounce
Shaft Diameter: 3/4 inch
RPM: 3400
Max Temperature: 165 degrees F
Max PSI: 2500
Max GPM: 2.6
Product Description
Gas Engine Flanged Plunger Pump
The General Pump TP2526J24UIL Pump is part of the TP Series 51 line of plunger pumps. This general cleaning pump comes with a flange for gasoline engines (SAE J609), a built-in unloader, and an in-line injector. Use in applications requiring a pump with a 2.6 GPM maximum flow rate and maximum pressure of 2500 PSI. Features left-hand shaft for adaptation into unique spaces.Specifications:
- Maximum Volume: 2.6 GPM
- Maximum Pressure: 2500 PSI
- Maximum RPM: 3400 RPM
- Inlet Port: 3/8"-19 BSP-F
- Discharge Port: 1/4"-19 BSP-F
- 11.0 ounce crankcase capacity
- Bore: 15mm
- Stroke: 6.6mm
- 125 PSI maximum inlet pressure
- 3/4" hollow shaft
- Flooded maximum inlet vacuum
- SAE J609 flanged for direct coupling to gas engines
- Built-in TP unloader
- Fixed downstream injector
- Fully anodized crankcase
- Oversized bearings
- Sight glass for easier monitoring
- Larger machined crankshaft - increases load potential and reduces fatigue
- Strongest manifold on the market
- Improved low and high pressure seals
- Reinforced valve cap area
- Positive aligning valve cap
- Support ridges and support ribs for piston guides
- Use GP Series 100 oil for best performance
