Skip to Main Content

MixRite 573CW Water Powered Proportioning Pump .51-5.1 oz. / gal.

Brand:
Mfr. Model #:
573CW
KR Part #:
MR573CW
Weight:
4.59 lbs
Availability:
4
Low Stock Warning
MSRP
$624.50
Now Only!
$371.72
starstarstarstarstar (1)
|
This MixRite water powered proportioner pump offers accurate dispensing and uses only 20% of pressure to drive the pump.
Prep 65

Prop 65

 
 

Technical Specifications

Max GPM: 11

Product Description

Dema Mixrite Pump for Car Washing Detergents and Rinse Additives

This proportioning pump offers accurate dispensing with no electricity required. It uses only 20% of pressure to drive the pump. It is perfect for car wash cleaning agents, detergents, and rinse additives.

Dimensions: 19.5" H x 7" W

  • Maximum flow 11 GPM
  • Includes on/off knob
  • Dilution range: 0.4% to 4%
  • Dilution ratio: 250:1 to25:4
  • Upper engine internal seal: Aflas
  • Lower chemical internal seal: Aflas
  • Spring material: 303 stainless steel
  • Dema model # 573CW
  • Chemically resistant nylon-fiberglass body
  • All seals withstand carwash additives
  • Easily replaceable wear parts
  • Extra lip seal piston kit included with each unit
  • Operating range of 2.9 PSI to 120 PSI
  • Hose barbs with swivel for easy installation
  • Includes 7 ft. 3/8" inlet tubing with foot valve strainer
  • Check valve with Hastelloy spring

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).

Product Reviews

1  Customer Review(s)
5 Star
1  (100%)
4 Star
0  (0%)
3 Star
0  (0%)
2 Star
0  (0%)
1 Star
0  (0%)

CID: -1 QueryString:mixrite-573cw-water-powered-proportioning-pump-51-5-1-oz-gal| Runtime:falsep-29303.aspx/p-29303.aspxen-US1https://www.kleen-ritecorp.com/3/22/2023searchEngineName=mixrite-573cw-water-powered-proportioning-pump-51-5-1-oz-galcompunix.productreviews.xml.config10148904283TrueUSDTrue44.200.168.160TrueFalse2:19 PM1FalseUSDTrueen-USFalse0en-US293031FalseFalseproduct| LastCustomerReview:
Ratingstarstarstarstarstar
Great product. Using this to run an 8 Bay Foam Brush system. Easily performs with all bays in use versus a Flojet and Hydrominder. Smooth flow and visuals of foam in bay and customers can tell the difference. Good control of chemical usage will save you money. Great reduction of use on air compressor since this is water driven. Periodic change of seal kit is very easy to perform. Dema support is very helpful if you need it. Mixrite is easy to install on your systems following Dema's instructions and guidelines.
Reviewed by Bruce  B
7/26/2017 8:36:15 PM
Frequently Asked Questions
Loading...